Product introduction
Specifications
The anti-static workbench surface is made of anti-static melamine high-pressure decorative laminate (commonly known as anti-static voltage film fireproof board) as the surface material and conductive substrate.The conductive substrate is generally a conductive particle board or a graphite-type composite board, so that the countertop has antistatic properties.Static electricity can be directed to the ground directly through the anti-static ground or ground wire.
The point-to-point resistance test on the surface of the workbench should comply with the national electronic industry standard SJ/T10694-2006.When testing the static leakage resistance of the workbench, one electrode is in good contact with the bench pad, and the other electrode (clip) is connected to the ground wire (or wrist strap jack) of the workbench.
The point-to-point resistance test on the surface of the workbench should comply with the national electronic industry standard SJ/T10694-2006.When testing the static leakage resistance of the workbench, one electrode is in good contact with the bench pad, and the other electrode (clip) is connected to the ground wire (or wrist strap jack) of the workbench.
The anti-static workbench surface is made of anti-static melamine high-pressure decorative laminate (commonly known as anti-static voltage film fireproof board) as the surface material and conductive substrate.The conductive substrate is generally a conductive particle board or a graphite-type composite board, so that the countertop has antistatic properties.Static electricity can be directed to the ground directly through the anti-static ground or ground wire.
The point-to-point resistance test on the surface of the workbench should comply with the national electronic industry standard SJ/T10694-2006.When testing the static leakage resistance of the workbench, one electrode is in good contact with the bench pad, and the other electrode (clip) is connected to the ground wire (or wrist strap jack) of the workbench.
The point-to-point resistance test on the surface of the workbench should comply with the national electronic industry standard SJ/T10694-2006.When testing the static leakage resistance of the workbench, one electrode is in good contact with the bench pad, and the other electrode (clip) is connected to the ground wire (or wrist strap jack) of the workbench.